Plumbing calls do not come in as jobs. They come in as symptoms. "The toilet keeps running." "Water came up in the shower when the washer drained." "There is a puddle next to the heater." Half of them come in as emergencies, and the customer is going down a list of numbers until somebody gives them a straight answer.
A price list is how you give that answer without guessing. Below are real prices out of the Tradesman Office plumbing book at Philadelphia metro calibration for 2026: drains and sewer, water heaters, toilets, and the add-ons that ride along with them.
Your market is different, so your numbers will be too. What carries over is the structure: which jobs get their own line, and which add-ons you name instead of swallowing.
How the prices are built
Every line is labor hours at a loaded rate, plus material at your cost with markup, plus overhead recovery and profit, rounded to a number a homeowner can hear. Take the 50-gallon gas water heater at $1,820. About four hours for a straight swap: drain down, disconnect, remove, set, connect, vent, fill, purge, light and test. Material lands near $545 with markup once you count the connectors, the pan, the venting parts, the gas connector, the sediment trap fittings and the haul-away. Overhead and profit ride on both.
The visit is a separate line. The book is built around a trip charge plus the line for the work, with the trip waived or credited when the customer goes ahead. The drain guide uses $89 for the trip. If you are not sure what yours should be, the trip charge calculator will work it out.
Drain and sewer price list
| Job | Book price |
|---|---|
| Clear a clogged sink, toilet, or tub and shower drain | $210 |
| Clear a clogged floor drain | $280 |
| Snake main drain, up to 50 feet | $420 |
| Snake main drain, 50 to 100 feet | $700 |
| Camera inspection | $420 |
| Hydro-jet, residential | $560 |
| Hydro-jet, heavy duty | $840 |
| Grease trap cleaning | $320 |
| Backwater valve install | $1,360 |
| Sewer line spot repair | $1,700 |
| Add: no accessible cleanout (roof vent or pull a toilet) | $200 to $400 |
The drain block is where flat rate pays for itself. One slow sink is a $210 job. Every fixture in the basement backing up is a main line, and if the snake will not clear it you are looking at a $560 hydro-jet and probably the $420 camera. The guy with one drain price in his head quotes $210 on the phone, then has a bad conversation on the basement stairs. More on that in the drain cleaning pricing guide.
Water heater price list
| Like-for-like replacement | Book price |
|---|---|
| Electric tank, 30 gallon | $1,280 |
| Electric tank, 40 gallon | $1,350 |
| Electric tank, 50 gallon | $1,580 |
| Gas tank, 30 gallon | $1,530 |
| Gas tank, 40 gallon | $1,590 |
| Gas tank, 50 gallon | $1,820 |
| Gas tank, 75 gallon | $2,410 |
| Tankless, electric | $2,000 |
| Tankless, gas (tankless to tankless or a clean conversion) | $2,950 |
The add-ons that ride along
| Add-on | Book price |
|---|---|
| Thermal expansion tank, where code requires it | $340 |
| T and P relief valve replacement | $250 |
| Drain pan and overflow | $190 |
| New shut-off valve | $180 |
| Earthquake straps | $130 |
| Recirculation pump install | $730 |
| Upsizing (platform, venting clearance or cabinetry) | $150 to $400 |
Those add-ons are where homemade pricing leaks. An expansion tank feels like twenty minutes and a fitting, so it gets thrown in for a hundred bucks. In the book it carries its share of the same overhead every other line carries, which is how it lands at $340. The water heater pricing guide goes through each one.
Toilet and fixture price list
| Job | Book price |
|---|---|
| Toilet replacement, standard height | $610 |
| Toilet replacement, comfort height | $650 |
| Toilet replacement, dual flush | $670 |
| Toilet replacement, one piece | $710 |
| Toilet replacement, pressure assist | $930 |
| Toilet replacement, wall mounted | $1,340 |
| Reseat a toilet with a new wax ring | $300 |
| Running toilet repair (flapper, fill valve or flush valve) | $180 to $240 |
| Shut-off valve replacement | $180 |
| Bidet seat, electric | $580 |
| Bidet attachment, non-electric | $180 |
Second toilet in the same house on the same day? The setup is already paid for, so $75 to $125 off the second one is fair and still makes money. The full breakdown is in the toilet replacement guide.
Three phone calls, priced before the truck moves
This is what the list is really for. You are not quoting on the phone. You are giving a range so the customer knows you are straight with them, and saying out loud that you will confirm it when you see it.
- "My toilet keeps running." Most likely a flapper, fill valve or flush valve, $180 to $240. If the toilet is twenty years old and cracked, a new standard toilet is $610.
- "Water came up in the shower when the washer drained." That is not a shower clog. That is the main line. The snake is $420 up to fifty feet, and if it keeps coming back the $420 camera is the next conversation.
- "There is water by the water heater." Could be a $250 T and P valve, a $340 expansion tank problem, or a tank that is done and a $1,580 to $1,820 replacement.
Three symptoms, a handful of real numbers, and the customer hears somebody who knows the work. That is usually enough to get the call.
After hours
Every line in the book carries a 1.5 after-hours multiplier on the work. The $420 main line snake at eleven at night is $630. The $210 sink is $315. Decide it once, in daylight, and read it off the sheet. The version of you standing in somebody's wet basement at midnight negotiates worse than the Tuesday afternoon version.
Every one of these prices started as hours, material and a rate. Put in your rate and your supply house prices and you have your own list. Or start from the book and change one cell.