What the hours cover
Install the breaker, land the circuit neutral on it, test it, and chase down the reason it trips if it does. That last part is why this is an hour and not ten minutes.
The math at the book numbers
The labor factor is the overhead multiplier divided by one minus the target margin. At 1.35 and 20 percent that is 1.69.
AFCI breaker, per circuit. 1 hours × $135 × 1.69 is $227.81 of labor. $40 of material × 1.30 is $52. Together that is $279.81, rounded to $280.
Dual function AFCI/GFCI breaker, per circuit. 1 hours × $135 × 1.69 is $227.81 of labor. $55 of material × 1.30 is $71.50. Together that is $299.31, rounded to $300.
Better is the Good price times 1.25 and Best is times 1.55. Same job done better, not a different job.
Same job at three labor rates
| Job | $110 rate | $135 rate | $165 rate |
|---|---|---|---|
| AFCI breaker, per circuit | $240 | $280 | $330 |
| Dual function AFCI/GFCI breaker, per circuit | $260 | $300 | $350 |
Good tier at each rate. Everything else left at the book numbers.
What moves this number
- Shared neutrals. A multiwire branch circuit on single pole AFCI breakers will trip until you sort it out.
- Old wiring with a neutral to ground fault somewhere in a wall. The breaker is only reporting it.
- Panel brand. Breaker cost swings a lot between manufacturers, so check your real cost.
Not in this price
Repairing the wiring fault a tripping breaker finds. Quote that once you know what it is.
The full breakdown is in the guide: How to Price a 200-Amp Service Upgrade.