What the hours cover

Disconnect the vent, replace the gasket, mount the new assembly, and verify the pressure switch makes.

The math at the book numbers

(billable hours × loaded labor rate × labor factor) + (material cost × markup), rounded to the nearest $10

The labor factor is the overhead multiplier divided by one minus the target margin. At 1.4 and 22 percent that is 1.79.

Inducer motor. 1.5 hours × $135 × 1.79 is $363.46 of labor. $225 of material × 1.35 is $303.75. Together that is $667.21, rounded to $670.

Better is the Good price times 1.25 and Best is times 1.55. Same job done better, not a different job.

Same job at three labor rates

Tier$110 rate$135 rate$165 rate
Good$600$670$750
Better$750$830$930
Best$930$1,030$1,160

All three tiers at each rate. Everything else left at the book numbers.

What moves this number

  • Part cost. Inducer assemblies swing by hundreds of dollars from one furnace to the next.
  • Condensate damage on a high efficiency furnace. The motor may not be the only thing that got wet.
  • A blocked vent or a bad pressure switch hose that caused the call in the first place.

Not in this price

The diagnostic, vent repairs, and the pressure switch.

The full breakdown is in the guide: How to Price an HVAC Service Call.