What the hours cover
Recover the charge, cut the old valve out, braze the new one in with nitrogen flowing, evacuate, and weigh the charge back in.
The math at the book numbers
The labor factor is the overhead multiplier divided by one minus the target margin. At 1.4 and 22 percent that is 1.79.
TXV / expansion valve. 2.5 hours × $135 × 1.79 is $605.77 of labor. $125 of material × 1.35 is $168.75. Together that is $774.52, rounded to $770.
Better is the Good price times 1.25 and Best is times 1.55. Same job done better, not a different job.
Same job at three labor rates
| Tier | $110 rate | $135 rate | $165 rate |
|---|---|---|---|
| Good | $660 | $770 | $910 |
| Better | $830 | $970 | $1,140 |
| Best | $1,030 | $1,200 | $1,410 |
All three tiers at each rate. Everything else left at the book numbers.
What moves this number
- Refrigerant. Whatever does not come back out of the recovery tank is a cost. Add it to material.
- Coil access. A valve buried in a tight plenum or an attic is not a two and a half hour job.
- An evacuation that will not hold. Now it is a leak search.
- A restriction that is not the valve.
Not in this price
The diagnostic, refrigerant beyond what you recovered, and a filter drier, which should go in any time the system is opened.
The full breakdown is in the guide: How to Price an HVAC Service Call.