What the hours cover

Match rotation and shaft, pull the grille, wire it, mount it, set the blade depth, and run it against the nameplate amps.

The math at the book numbers

(billable hours × loaded labor rate × labor factor) + (material cost × markup), rounded to the nearest $10

The labor factor is the overhead multiplier divided by one minus the target margin. At 1.4 and 22 percent that is 1.79.

Condenser fan motor. 1.5 hours × $135 × 1.79 is $363.46 of labor. $145 of material × 1.35 is $195.75. Together that is $559.21, rounded to $560.

Better is the Good price times 1.25 and Best is times 1.55. Same job done better, not a different job.

Same job at three labor rates

Tier$110 rate$135 rate$165 rate
Good$490$560$640
Better$610$700$800
Best$760$870$990

All three tiers at each rate. Everything else left at the book numbers.

What moves this number

  • OEM or ECM motors. They can cost several times the allowance. Type in the real number.
  • A blade that will not come off the old shaft. Now you need a blade too.
  • The capacitor. A new motor gets a matched capacitor, and that is another line.
  • Rooftop and tight side yard access.

Not in this price

The diagnostic, a new blade, and the capacitor.

The full breakdown is in the guide: How to Price an HVAC Service Call.