What the hours cover

Discharge the old capacitor, verify the microfarad and voltage rating against the nameplate, swap it, and confirm amp draw on the compressor and fan.

The math at the book numbers

(billable hours × loaded labor rate × labor factor) + (material cost × markup), rounded to the nearest $10

The labor factor is the overhead multiplier divided by one minus the target margin. At 1.4 and 22 percent that is 1.79.

Run capacitor. 0.5 hours × $135 × 1.79 is $121.15 of labor. $15 of material × 1.35 is $20.25. Together that is $141.40, which is under the $175 minimum charge, so the Good price is $175.

Better is the Good price times 1.25 and Best is times 1.55. Same job done better, not a different job.

Same job at three labor rates

Tier$110 rate$135 rate$165 rate
Good$175$175$175
Better$175$180$210
Best$180$220$260

All three tiers at each rate. Everything else left at the book numbers.

What moves this number

  • The diagnostic. Finding out it was the capacitor is its own line and it is not in this price.
  • A capacitor that failed because a motor is failing. Check the amp draw before you leave.
  • The part is not on the truck. Then it is two trips on one ticket.

Not in this price

The dispatch and diagnostic fee, and anything the failed capacitor took with it.

The full breakdown is in the guide: How to Price an HVAC Service Call.